Reading the circles
Each probe's circle has a radius of round-trip milliseconds × 100 km, the farthest point light could reach. The target must be where all circles overlap; probes with lower latency draw smaller circles and pin it down better.
Six probes around the world measured their round-trip time to a server, and each draws the area light could reach in that time. Use the circles to click where the server is.
However fast data travels in fibre, there's a ceiling of about 200 km per millisecond. If a probe's round trip to an address takes 10 ms, the address can't be more than 1,000 km from the probe. With several probes, the overlap of the circles is where the answer lies.
Each probe's circle has a radius of round-trip milliseconds × 100 km, the farthest point light could reach. The target must be where all circles overlap; probes with lower latency draw smaller circles and pin it down better.
Network routes aren't straight and routers add queueing, so the real distance is usually much less than the radius. As a rule of thumb it's about half to two thirds of the speed-of-light limit.
Targets are RIPE Atlas anchor servers, and the latencies come from the public ping measurements they run against each other (the anchoring mesh), with six well-spread probes per round. This site's servers measure nothing; the rounds use only public data.
Same as Where is this IP?: the exact spot scores 5000, falling with distance to about half at 1,000 km.
No: the speed of light is a hard limit, so the real target is always inside every circle. If your guess is outside one, move it toward the overlap.
Yes. This site's location checks use probes worldwide to measure latency and test whether a database's city is right.
Your best score is stored only in your browser.